Predicting concrete flow properties from simple measurements

A study* using Department of Energy Office of Science supercomputers has led to a new way to predict concrete’s flow properties from simple measurements.

When concrete is pumped, it can jam in pipes, leading to time and cost overruns during construction. The particles can settle out, leading to structural problems after the concrete hardens. And a significant amount of energy is needed to create the cement that reacts with water to produce hardened concrete. 

This critical binding agent is manufactured at high temperatures in a kiln, a process that generates a great deal of carbon dioxide, a greenhouse gas. According to the World Business Council for Sustainable Development, worldwide cement manufacture is estimated to account for at least five percent of humanity’s carbon dioxide emissions.

The industry can develop less energy-intensive concrete mixtures by replacing some of the cement with alternative materials like fly ash. However, these alternatives can require expensive chemical additives, and they also can have a range of effects on concrete flow. Ideally, the industry would like to tailor the use of these chemical additives, thus helping to assure the greatest use of alternative materials.

“We’d like to be able to design concrete that performs better on the job and doesn’t demand so much energy to manufacture,” says National Institute of Standards and Technology computer scientist William George. “But what should we make it from? And what can we replace cement with? The answers will affect its properties. So we realized we needed to learn more about how suspensions work.”

While it’s a simple goal to describe, accomplishing it demanded some complex math and physics, and at the same time, an enormous amount of computer power to study how all the particles and fluid react as they are mixed. The team, made up of researchers from researchers NIST, the University of Strasbourg and Sika, was granted an INCITE Award that provided more than 110 million core hours at the Argonne Leadership Computing Facility. The ALCF supercomputers allowed them to simulate how a suspension would change if one or more parameters varied-the number of suspended particles, for example, or their size.

Suspensions have a remarkable property: Plotting two parameters – viscosity vs. shear rate (the latter refers to how neighboring layers of the fluid change velocity as it flows through a pipe) – always generates the same shaped curve as plotting them for the suspending fluid alone without added particles. This is true no matter what fluid is used. The curve just sits on a different location on the X-Y axis, as though someone had pushed it upwards or off to the side without otherwise altering its shape.

What the team unexpectedly found was the amount that the curves had to be shifted could be predicted based on the microscopic shear rates that existed between neighboring particles. Experiments at the University of Strasbourg confirmed the simulated results, which allowed the team to come up with a general theory of suspensions’ properties.

“So now if you have a suspension that is made with a fluid that behaves a bit differently, you can still predict what its properties will be,” George says. “You just have to measure the properties of the fluid that the particles are placed in, and you predict how the fresh concrete will behave.”

The results should help accelerate the design of a new generation of high-performance and eco-friendly cement-based materials by reducing time and costs associated with R&D, George adds.

NIST is also using this new knowledge to create Standard Reference Materials for industrial researchers to calibrate concrete rheometers – instruments used to measure the flow of complex fluids – for material development. Ultimately, this could help expand the use of alternative materials. While it is not yet known whether these alternatives will fit the bill, the team’s research could eventually help industry researchers zero in on the best new recipes.

*M. Liard, N.S. Martys, W.L. George, D. Lootens and P. Hebraud. Scaling laws for the flow of generalized Newtonian suspensions. Journal of Rheology, 58, 1993 (Nov/Dec 2014 issue), doi:10.1122/1.4896896.

(Visited 50 times, 1 visits today)

Get involved

Register

As a member of this site you will be able to receive aggregates news relating only to those categories that are most relevant to you, submit job listings for FREE, post questions in the Q&A, and more.

Register Now

Feature your company

The Feature Your Company listing is your custom-made (by us) profile page that allows you to add any of the following content: text, videos, links, images. The page will also be listed on the Featured Company landing page. Over 560 unique aggregates users visit the site per day! Complete the enquiry form now to contact us.

Contact us

Jobs

Are you looking for an aggregate related job? Click here to see our jobs listing supplied by industry experts United Employment.

See Jobs

Advertise

Reach thousands of budget holders and decision makers by promoting your company on the longest established aggregate website in the US & Canada. Or advertise in our emails which are sent to opted-in subscribers according to their chosen categories. All advertising will display correctly on tablets and mobiles as this site is responsive.